Velleman VLE4 Bedienungsanleitung PDF herunterladen (Seite 6)

VLE4

18.03.2010 ©Velleman nv

5. Overview and use

Refer to the illustrations on page 2 of this manual.

charger 4 display

1 charger terminals 5 discharge button

2 open-button 6 power jac

3 backlight button 7 USB port

display [4]

A battery status indicato

C 9V charge indicators

B USB available indicato

D AA/AAA/C/D charge indicators

6. Use

• The VLE4 is only suitable for charging NiMH batteries; do not

insert other types.

• Press the backlight button [3] at any time to switch on the backlight

for ±15s.

Charging

• Open the top of the charger by pressing the open-button [2].

• For type AA/AAA/C/D batteries: insert up to 4 batteries between the

charger terminals [1]. Respect the polarity as indicated inside the

charger.

• For type 9V batteries: insert up to 2 batteries into the dedicated

terminals of the charger.

• Close the top of the charger.

• Plug the output connector of the included adaptor into the power

jack [6]. Only use the included adaptor or one with the same

specifications. Plug the adaptor into a suitable mains outlet.

• The LCD [4] will display the word CHARGE and shows the current

load of each inserted battery ([C] or [D]).

• When all batteries are full, the word FULL is shown.

• Unplug the charger from the mains and remove the batteries.

• In case a bad or wrongly inserted battery is detected, the display

shows BAD and the icon of the faulty battery is flashing. Re-insert

the battery in the correct way or dispose of the bad battery in the

appropriate way.

Discharging

• Insert batteries and connect the charger to the mains (see §6

Charging).

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Keine Kommentare

Velleman VLE4 Bedienungsanleitung Seite 6