Velleman VTTEST14 Bedienungsanleitung PDF herunterladen

VTTEST14 - 1 - VELLEMAN

VTTEST14 – AUDIO CABLE TESTER

1. Introduction & Features

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm

the environment.

Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised

company for recycling.

This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the VTTEST14! Please read the manual thoroughly before bringing this device into service. If the

device was damaged in transit, don't install or use it and contact your dealer.

2. Use

Turn the rotary switch fully clockwise to test the strength of a battery. The battery LED will light bright green if the

internal battery is fully charged.

Plug one end of the cable into the appropriate jack on the left side of your VTTEST14. Plug the other end of the cable

into the appropriate jack on the right. Now, set the rotary switch to “1” to test the connection of contact “1” on the plug

inserted into the left. If there is a connection, the green LED will light below “1” while a yellow LED will light above the

contact of the plug connected to the right. If no LED lights, there is no connection. The left connection will either be

floating or open. Set the rotary switch to “2” to test contact “2” etc. until all contacts have been checked. If the

GROUND LED lights, there is a connection between the corresponding contacts and the chassis.

To test a cable with banana plugs, just plug each end of the cable into the banana jacks. The LED will light and the

unit will beep if there is a connection between the plugs. These jacks can also be used for continuity tests using two

probe leads.

¼” TS Mono to ¼” Mono ¼” TRS to ¼” TRS

1 Sleeve 1 Sleeve, 3 Ring 1 Sleeve 1 Sleeve, 3 Ring

2 Tip 2 Tip 2 Tip 2 Tip

3 Ring 1 Sleeve, 3 Ring

(shorted with sleeve)

3 Ring 1 Sleeve, 3 Ring

XLR Balanced to XLR Balanced XLR Unbalanced to XLR Unbalanced

Pin 1 Pin 1 Pin 1 Pin 1, Pin 3

Pin 2 Pin 2 Pin 2 Pin 2

Pin 3 Pin 3 Pin 3 Pin 1, Pin 3

¼” TS Mono to XLR Unbalanced ¼” TRS to XLR Balanced

1 Sleeve Pin 1, Pin 3 1 Sleeve Pin 1

2 Tip Pin 2 2 Tip Pin 2

3 Ring Pin 1, Pin 3

(shorted with sleeve)

3 Ring Pin 3

7. Technical Specifications

Power Supply 1 x 9V battery (not incl.)

Dimensions 160 x 66 x 120mm

Total Weight 575g

The information in this manual is subject to change without prior notice.

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - 7. Technical Specifications

VTTEST14 - 1 - VELLEMAN VTTEST14 – AUDIO CABLE TESTER 1. Introduction & Features To all residents of the European Union Important environmenta

Seite 2 - VTTEST14 – AUDIOKABELTESTER

VTTEST14 - 2 - VELLEMAN VTTEST14 – AUDIOKABELTESTER 1. Inleiding en kenmerken Aan alle ingezetenen van de Europese Unie Belangrijke milieu-informa

Seite 3 - 7. Spécifications techniques

VTTEST14 - 3 - VELLEMAN VTTEST14 – TESTEUR DE CÂBLE AUDIO 1. Introduction et caractéristiques Aux résidents de l'Union européenne Des informa

Seite 4 - 7. Especificaciones

VTTEST14 - 4 - VELLEMAN VTTEST14 – COMPROBADOR DE CABLES AUDIO 1. Introducción & Características A los ciudadanos de la Unión Europea Importan

Seite 5 - 7. Technische Daten

VTTEST14 - 5 - VELLEMAN VTTEST14 – TESTGERÄT FÜR AUDIOKABEL 1. Einführung An alle Einwohner der Europäischen Union Wichtige Umweltinformationen ü

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman VTTEST14 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Velleman VTTEST14 herunter. Velleman VTTEST14 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für elektrische Velleman VTTEST14