Velleman VDSABS15A Bedienungsanleitung PDF herunterladen (Seite 4)

VDSABS15A

V. 02 – 24/09/2013 4 ©Velleman nv

4. Installation

Install the device in a location where few people pass by and that is unreachable for unauthorised persons.

Make sure there is no flammable material with a 50 cm radius of the device.

5. Overview

Refer to the illustrations on page 2 of this manual.

Power connector

Fuse holder

Power switch

Line output, XLR, balanced, + 4 dB

Line output, 1/4" jack, + 4 dB

Line input, XLR, can receive both balanced and unbalanced signals

RCA (R/L) input jack, can receive both balanced and unbalanced signals

Microphone input jack, 1/4" jack, can receive unbalanced signals

Microphone input jack, XLR, can receive balanced signals

Volume control of MIC input

Volume control of RCA line input

Adjusts the output level or volume

High tone level control, 12 dB raising attenuation at 3.5 kHz

Low tone level control, 12 dB raising attenuation at 100 Hz

Input signal overload indicator

6. Operation

1. Make sure the power switch [3] is set to off (“0”).

2. Plug in the power cord [1].

3. Set the power switch [3] to on (“1”). The device starts operating.

4. Set the power switch to off (“0”) to stop the device.

7. Cleaning and Maintenance

All screws should be tightened and free of corrosion.

The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,

trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting

supports, do not change the location of the connections.

The electric power supply cables must not show any damage. Have a qualified technician maintain the

device.

Disconnect the device from the mains prior to maintenance activities.

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

There are no user-serviceable parts.

Contact your dealer for spare parts if necessary.

8. Technical Specifications

woofer size

15" (38 cm)

tweeter size

1.35" (3.5 cm)

impedance

4 ohm

amplifier

180 W (120 Wrms)

power supply

230 Vac

frequency response

40 Hz - 18 kHz

sensitivity (1W/1m)

99 dB

dimensions

720 x 495 x 365 mm

weight

28 kg

1 2 3 4 5 6 7 8 9 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman VDSABS15A Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Velleman VDSABS15A