Velleman CAMIP16 User manual Bedienungsanleitung PDF herunterladen (Seite 12)

CAMIP16

V. 01 – 13/06/2013 12 ©Velleman nv

The example below shows the screen for a D-Link router: select the

“Advanced” tab and then choose “Port Forwarding”.

3. Enter the camera IP address and port number that you noted down and

enable this rule. You can now access your camera through the internet.

4. If your wireless router supports UPnP (Universal Plug and Play), make

sure the function is enabled. UPnP enhances communication between

the router and wireless devices. If necessary, refer to the manual of the

router software.

10.5 Checking the Connection

When you have completed network setup and port forwarding, check your

connection setup as follows:

1. On your mobile device, switch your network mode to 3G or connect to a

different wireless network than the one that has your camera

connected.

2. Start EagleEyes and select the camera you just added to see if you can

access it.

o If yes, your network connection works. Proceed with “Changing the

Account User Name and Password” below.

o If not, proceed with the following step.

3. Switch your network mode back to the wireless network that has your

camera connected.

4. Start EagleEyes, and add a new connection with the IP address and port

number that you set up in “Adding Your Camera to the EagleEyes

App”.

5. See if you can access the camera with this connection.

o If yes, return to “Port Forwarding” to set up port forwarding again.

o If not, return to step 4 of “Adding Your Camera to the EagleEyes

App” and reconfigure the connection.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Keine Kommentare

Velleman CAMIP16 User manual Bedienungsanleitung Seite 12