Velleman DVR-4LCD Bedienungsanleitung PDF herunterladen (Seite 39)

Function Description

Image Size / Quality Choose the image size and quality.

Manual Record / Event Record /

Timer Record

Select the record type that the DVR will take recording (Yes / No), and select the

IPS setting for the selected record type.

Pre-Alarm Record Check this option if you want to enable the pre-alarm recording function.

When any alarm is triggered, the DVR will record 8MB video data before the

alarm event actually happened.

Overwrite Select “Yes” to enable the HDD overwrite function when the HDD is full, or “No” to

disable this function.

When this function is on, and the recording and the pre-alarm function are

activated, the DVR will overwrite 8GB data from the oldest for continuous

recording without notice.

9.4.5 Record Timer

You can set the record schedule for normal recording or motion recording.

Function Description

Permit Select this checkbox to allow the record timer setting to be applied to the connected DVR. If

this checkbox is deselected, the setting will not be applied to the connected DVR even when

you click “Apply” and “OK”.

Routine / Motion Click “Routine” tab to select the time range for continuous recording, or “Motion” tab to select

the time range within which the recording will be on when any movement is detected.

Time Table Find the day and time you want to enable the recording. Then, click to select the time

interval(s). Each interval represents 30 minutes.

To enable the recording all the time, click “＋”; to clear the record timer setting, click “－”.

9.4.6 Alert

You can set the DVR to beep to notify of an event. Check the buzzer option you want,

and set how long the beep sound will be lasted.

1 2 ... 34 35 36 37 38 39 40 41 42 43

Keine Kommentare

Velleman DVR-4LCD Bedienungsanleitung Seite 39