Velleman LEDC10 Bedienungsanleitung PDF herunterladen (Seite 5)

LEDC10

V. 01 – 28/03/2013 5 ©Velleman nv

Step 5 – Reconnect the connector cable

 Make sure the connector is fully opened.

 Insert the cable and close the connector.

You can now close the touch panel.

5. Wiring

Wiring: RGB mode

For RGB mode, wire the controller as follows:

Wiring: colour temperature mode

For colour temperature mode, wire the controller as follows:

Wiring: Dimmer mode

For dimmer mode, wire the controller as follows:

1 2 3 4 5 6 7 8 9 10 ... 53 54

Keine Kommentare

Velleman LEDC10 Bedienungsanleitung Seite 5