Velleman LPTDX1220 Bedienungsanleitung PDF herunterladen (Seite 6)

LPTDX1220 GB

SETTING 1 : PREHEATING

SETTING 2 : DIMMED / SWITCHED

SETTING 3 : SCENE PROGRAMMING

SETTING 4 : SET FADER TIME

SETTING 5 : LIST OF FADER TIMES

SETTING 6 : SET SQUARE LAW OR LINEAR DIMMING CURVE

SETTING 7 : SETTING MAXIMUM OUTPUT WATTAGE

Locking the keyboard : Press MODE + FUN + ↓ simultaneously

Unlocking the keyboard : Press MODE + FUN + ↑ simultaneously

Three Different Modes

Mode 1 : DMX

The display reads :

d = DMX

001 – 512 = DMX start addresses

← : decrease the DMX start address of a channel

→ : increase the DMX start address of a channel

↑ : increase the DMX start address by 12

↓ : reset to d001

SEL : confirms the selected channel

SET : access to different settings

CAN : cancels current operation and return to the previous confirmed one

MODE : switch to analogue mode

Assign a start address to each LPTDX1220 when connecting multiple LPTDX1220’s to a DMX

control panel. This address determines the channels used by each LPTDX1220.

Example :

Device #1 : start address = d001, DMX channels used : 01 - 12

Device #2 : start address = d013, DMX channels used : 13 - 24

Device #3 : start address = d025, DMX channels used : 25 - 36

A resistor should terminate the DMX connection. Put the ON/TERMINATE selector in the ON

position.

Mode 2 : Analogue

The display reads :

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Velleman LPTDX1220 Bedienungsanleitung Seite 6