Velleman LX106 Bedienungsanleitung PDF herunterladen (Seite 4)

LX106/LX107

V. 05 – 15/05/2013 4 ©Velleman nv

Familiarise yourself with the functions of the device before actually using it. Do not allow operation by

unqualified people. Any damage that may occur will most probably be due to unprofessional use of the

device.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to

the device is not covered by the warranty.

Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,

lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the

dealer will not accept responsibility for any ensuing defects or problems.

Mechanical wear and LEDs are not covered by warranty.

A qualified technician should install and service this device.

Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the

device against damage by leaving it switched off until it has reached room temperature.

This device is designed for professional use on stage, in discos, theatres, etc. The device should only be

used indoors with an alternating current of 240 VAC, 50 Hz.

Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.

Use the original packaging if the device is to be transported.

Keep this manual for future reference.

4. Features

PAR projector with high power RGBW LEDs

extremely slim design

smooth dimming modes for perfect colour mixing

DMX control:

o 4 channels: RGBW

o 6 channels: RGBW, dimmer and shutter

o 10 channels: RGBW, dimmer, colour temperature, shutter, auto, speed, dimming curves

built-in programs

double bracket: can be used as a floor spot

sound-activated via built-in microphone.

5. Overview

Refer to the illustrations on page 2 of this manual.

LX106

LX107

bracket

hinges

DMX input

DMX output

hinges

DMX input

DMX output

built-in microphone + sensitivity regulator

control buttons

display

power input

power output

fuse holder

power output

6. Installation

Choose a suitable mounting spot. Mount the fixture in the desired angle using the included bracket. Connect the

power cord to the mains. Disconnect after use.

Mounting the Device

Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.

The carrying construction must be able to support 10 times the weight of the device for 1 hour without

deforming.

The installation must always be secured with a secondary attachment e.g. a safety cable.

1 2 3 4 5 6 7 8 9 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman LX106 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Velleman LX106