Velleman Perel WLS552 Bedienungsanleitung PDF herunterladen (Seite 8)

WLS552 PEREL

Clean the dipstick and insert it into the tank. Check the oil level if necessary. Make sure the oil level is between the

two marks on the dipstick.

Re-install the seal. Be careful not to damage the threads of the aluminium oil tank cover. Dispose of the oil according

to the local regulations.

• Transporting the Log Splitter

Unplug the log splitter from the mains and let it cool down. Move the log splitter using the handle. If it has to be

transported over long distances, make sure to install the log splitter on a flat and non-slippery surface. Fasten the log

splitter if necessary. Recommended transportation temperature: -25°C ~ +40°C.

5. Troubleshooting

Problem Cause Possible Solution

Incorrect positioning of the log Position log correctly

Log exceeds permitted dimensions Pre-cut log to meet dimensions

Wedge does not cut Sharpen wedge

Oil leak Locate oil leak, contact your dealer

Log fails to split

Hydraulic pressure too low Check oil level and refill if necessary

Log pusher advances with jerks or

strong vibrations

Air in hydraulic pump Make sure the bleed screw has been

loosened

Oil leaks Leakage from the tank Worn seals, contact your dealer

6. Technical Specifications

Electrical Motor

Voltage 240VAC/50Hz

Protection Class IP54

Power 1.5 kW

Rotation Speed 2,850 RPM

Splitter Data

Max. Length of Travel 375mm

Max. Splitting Force 5t

Oil Tank Capacity 3.7l

Splitter Capacity

Max. Diameter 250mm

Min. Diameter 50mm

Max. Length 520mm

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Keine Kommentare

Velleman Perel WLS552 Bedienungsanleitung Seite 8