Velleman HPS40 Bedienungsanleitung PDF herunterladen (Seite 19)

Velleman 19

HPS40 Technical Doc

Maximum sample rate 40MS/s for repetitive signals (10MS/s for single shot events)

Input amplifier bandwidth (-3dB) From 5MHz at 5mV/div to 12MHz at 50mV, 1V & 20V /div

Input impedance 1Mohm // 20pF (standard oscilloscope probe)

Maximum input voltage 100Vpeak (AC + DC), 200Vpeak-peak (AC only)

Input coupling DC, AC and GND (GND for auto zero reference)

Vertical resolution

8bit± 1bit linearity

Trigger modes Run, Normal, Once, Roll mode for 1s/div and slower timebase

Trigger level Adjustable in 8 steps

LCD Graphics 112 x 192 pixels with LED backlight

Signal storage 256 samples with 2 memories, max. 179 samples visible (256 using X shift)

dBm measurement (0dBm= 0.775V in

600ohm)

From -73dB tot +40dB (up to 60dB with X10 probe) ±0.5dB accuracy

dBV measurements (0dBV= 1V)

From -75dB tot +38dB (up to 58dB with X10 probe) ±0.5dB accuracy

True-rms measurement From 0.1mV to 80V (up to 400Vrms with X10 probe) 2.5% accuracy

Peak to peak AC sensitivity (sinewave ref.) 0.1mV to 160V (1mV to 1000V with x10 probe) 2% accuracy

Timebase range in 32 steps 50ns to 1hour / division

Input sensitivity range in 12 steps 5mV to 20V/division at X1- 50mV to 200V/div at X10

Probe calibration output Approx. 2KHz / 4.5Vpp

Supply voltage 9VDC/ min 300mA adapter (unregulated) 12VDC if regulated

Batteries (option) Alkaline type AA or Ni Cd / NiMH rechargeable ( 5 pcs required)

Charge current for rechargeable batteries 90mA

Battery current (average) On: 170mA, with backlight: 240mA, standby current: < 600µA

Operating temperature 0 to 50°C (32 to 122°F)

Fysical characteristics Dim: 105x220x35mm (4.13x7.95x1.38”) Weight 450g (16oz.) ex. Batteries

SPECIFICATIONS

1 2 ... 14 15 16 17 18 19 20

Keine Kommentare

Velleman HPS40 Bedienungsanleitung Seite 19