Velleman CTC1000KP Bedienungsanleitung PDF herunterladen (Seite 9)

CTC1000KP

V. 01 – 12/06/2013 9 ©Velleman nv

Red LED flashes 5 times, a long beep sounds.

Home Mode

Press .

Red LED flashes 5 times, keypad sounds 3

beeps.

Disarm Mode

Enter a control panel user code and .

Red LED flashes 5 times, keypad sounds 2

beeps.

Enter Test Mode

Enter keypad PIN code and press ＊ key.

Green LED lights on, keypad sounds 1 long

beep.

Panic Alarm

Press 1 + 3 simultaneously.

Red LED flashes 5 times, a long beep sounds.

Fire Alarm

Press 4 + 6 simultaneously.

Red LED flashes 5 times, a long beep sounds.

Medical Alarm

Press 7 + 9 simultaneously.

Red LED flashes 5 times, a long beep sounds.

11. Test mode

You can use the test mode to avoid tamper alarm when installing,

replacing low batteries or moving the keypad to a different location.

To put the keypad in test mode:

 Enter the PIN code (default: 0000) followed by ＊.

The green LED will flash, a long beep sounds.

 To exit test mode, press twice.

The keypad will sound a long beep and the green LED will remain

lit.

Test mode: key combinations

In test mode, you can use the following key combinations:

Change the PIN code

Press ＊ and then 6.

Enter old pin code and press .

Enter new 4-digit pin code and

press #.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 68 69

Keine Kommentare

Velleman CTC1000KP Bedienungsanleitung Seite 9