Velleman CCTVPROM17 Installationsanleitung PDF herunterladen (Seite 9)

CCTVPROM17

V. 03 – 05/05/2014 9 ©Velleman nv

10.2 Enabling Push Video

From iPhone or iPad

1. In the iPhone/iPad main menu, select Settings > Notifications.

2. Select EagleEyes and make sure Notification Center is set to ON.

3. Open EagleEyes and switch the Push Video button to ON. You receive a message that push notification (push video) is

enabled.

4. Return to the main menu of your iPhone/iPad.

You receive event notifications when there is an alarm event. Select Launch to play the recorded clip immediately.

From Android Mobile Device

In the address book, switch Guard from OFF to ON.

11. Technical Specifications

video format

PAL

video compression

H.264

video input

8 channels, composite video signal 1 Vpp / 75 ohm BNC

video output

composite video signal

1 Vpp / 75 ohm BNC

VGA

max. 1600 x 1200 pixels

HDMI

max. 1600 x 1200 pixels

video loop out

–

maximum recording rate

(PAL)

frame

704 × 576 pixels @ 100 fps (PAL)

CIF

352 × 288 pixels @ 200 fps (PAL)

adjustable recording speed

–

image quality setting

best – high – normal – basic

hard disk storage

built-in SATA type, supports 1 x HDD, supported HDD capacity 2 TB (HDD not incl.)

recording mode

manual / timer / motion / network / alarm

refresh rate

200 IPS for PAL

multiplex operation

live display, record, playback, backup and network

audio I/O

4 x audio in, 1 x audio out (mono)

motion detection area

16 × 12 grids per channel

motion detection sensitivity

high, normal, low

pre-alarm recording

8 MB

backup device

USB 2.0 flash drive (for backup and firmware updates)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman CCTVPROM17 Installationsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Velleman CCTVPROM17