Velleman CAMSCC3G Datenblatt PDF herunterladen (Seite 8)

CAMSCC3G

Components nv

Note 2: for safety reasons, the device always keeps a "List of Authorisations” stored in its

internal memory where it saves information on authorised users.

Only authorised users can use the services supplied by the device.

The List of Authorisations can save information on up to 20 users. To be

automatically added to the List of Authorisations, users must video call the device

and enter correctly enter its PIN code. The first user on the list is the

Administrator, who is authorised to configure the device by using SMS commands

(please see the “management" section).

Note 3: if a video call is made to the device by a user not on the list – once 20 authorised

users are listed and stored in the memory - the device will not recognise the caller,

who will be unable to connect to the device.

Warning 1: do not conceal your number while making a video call. The device will be

unable to recognise the caller and will refuse the connection.

Note 4: CAMSCC3G video services can be used even when the charger is disconnected. A

video call will not be connected if battery capacity is insufficient (below 5%).

Note 5: Video calls will be terminated if battery capacity has reached its minimum

operative level (below 5%) and an authorised user calls and activates the device.

The user will receive a warning that the battery is low before the call is terminated.

Note 6: the CAMSCC3G must be placed in a fixed position. To ensure that video call quality

remains high, place the device in an appropriate position checking the network LED

[J] - which shows the strength of the radio signal received by the device.

Advanced functions for the limited access mode

Management

• Only the administrator - the first user saved on the device’s List of Authorisations – is

authorised to change settings on the List of Authorisations.

• The Administrator can send commands to the device using SMS text messages. These can

be used to change a number of settings on the List of Authorisations.

• The Administrator can use 6 different commands. They are:

1) Change the number of users saved on the List of Authorisations;

2) Change the Administrator's number;

3) Delete an authorised user;

4) Delete all authorised users;

5) Enter a number as an authorised user;

6) change the PIN code.

Note: SMS COMMANDS are not caps sensitive.

Warning: Should the Administrator change his/her video phone – for example following an

MNP request – we recommend the new number be saved as Administrator. For

any problems connected to an Administrator number change, please contact

Customer Services.

1) To change the number of users saved in the List of Authorisations

• The List of Authorisations has been programmed to save 20 authorised users. The

Administrator can change this predefined number to any number between 1 and 20 by

sending an SMS message to the device containing the following text:

#modlist*[NUMBER]#[PIN]#

Note: [NUMBER] must be a number between 1 and 20.

[PIN] is the correct 4 digit pin code

For example, the following message can be sent to limit the List of Authorisations

to only 3 users: #modlist*3#1234#

Warning: All information on excess users will be automatically deleted once the number of

users saved in the List of Authorisations is changed, if the new number is lower

than the previous one.

• No more than 20 users can be saved on the List of Authorisations

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman CAMSCC3G Datenblatt Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras Velleman CAMSCC3G