Velleman VTSSC40N Bedienungsanleitung PDF herunterladen

VTSSC40N - 1 - VELLEMAN

VTSSC40N – SOLDERING STATION WITH LCD & CERAMIC HEATER

1. Introduction + Description

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment.

Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised company for recycling.

This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the VTSSC40N! Please read the manual carefully before bringing this device into service. This

soldering station features a temperature control (150°C to 450°C) and a digital temperature display which displays the set

temperature and the actual temperature simultaneously.

The VTSSC40N is a 48W soldering station with a temperature sensor in the ceramic heating element. The heating

element is supplied with the necessary power via a safe 24V transformer, while the bit is completely isolated from the

mains. In case of malfunction, a warning will be displayed on the LCD and the device will emit a sound.

1. LCD temperature read-out (display precision: 5%)

2. temperature control

3. iron stand

4. soldering iron

5. sponge tray

6. soldering iron connection

7. ON/OFF switch

at the rear: fuse holder (250V/1A 5x20mm: FF1N)

Standard bit BITC10N1

Replacement soldering iron: VTSSC40N/SP

Spare bit BITC10N2, BITC10N3, BITC10N4

Dimensions 185 x 100 x 170mm

Weight 1.58kg.

Environmental conditions +5><+40°C ; RH<85%

2. Operating Instructions

• Verify whether the mains voltage is compatible with the operating voltage of the device before plugging it in.

• Make sure that the device was not damaged in transit.

• Connect the soldering iron by means of the 4-pin plug and screw its nut tightly.

• Switch the device on by means of the on/off switch and set the desired temperature by means of the pushbuttons.

One brief push will result in a 1° modification ; keep the button pushed to modify faster (steps of 10°).

• The set temperature is stored internally: the next time you use your VTSSC40N, it will automatically display the

last set temperature.

3. Tips for New Tips

1. Switch the device on and set a temperature of 250°C.

2. Coat the surface with solder when the temperature of the tip has reached 250°C.

3. Install the desired temperature after allowing the unit to idle at 250°C for 3 minutes.

4. The iron will be ready for use when the preset temperature is reached.

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - 3. Tips for New Tips

VTSSC40N - 1 - VELLEMAN VTSSC40N – SOLDERING STATION WITH LCD & CERAMIC HEATER 1. Introduction + Description To all residents of the European

Seite 2 - 1. Inleiding + Beschrijving

VTSSC40N - 2 - VELLEMAN 4. Common Causes for Tip Failure 1. The tip is not sufficiently tinned. 2. Wiping the tip on a surface with high sulphur

Seite 3 - 5. Belangrijke opmerkingen

VTSSC40N - 3 - VELLEMAN Achteraan zit de zekering (250V/1A 5x20mm: FF1N) Standaard bit BITC10N1 Vervanging soldeerbout: VTSSC40N/SP Reservebit BI

Seite 4

VTSSC40N - 4 - VELLEMAN VTSSC40N – STATION DE SOUDAGE AVEC LCD & RESISTANCE EN CERAMIQUE 1. Introduction + Description Aux résidents de l&apos

Seite 5 - 5. Remarques importantes

VTSSC40N - 5 - VELLEMAN 4. Panne défectueuse: causes possibles 1. La panne est insuffisamment étamée. 2. La panne est entrée en contact avec une

Seite 6 - 3. Primer uso de una punta

VTSSC40N - 6 - VELLEMAN Punta estándar BITC10N1 Soldador de recambio VTSSC40N/SP Punta de recambio BITC10N2, BITC10N3, BITC10N4 Dimensiones 185

Seite 7 - 2. Bedienungsanweisungen

VTSSC40N - 7 - VELLEMAN VTSSC40N – LÖTSTATION MIT LCD UND KERAMISCHEM HEIZKÖRPER 1. Einführung + Beschreibung An alle Einwohner der Europäischen

Seite 8 - 5. Wichtige Hinweise

VTSSC40N - 8 - VELLEMAN 3. Hinweise für neue Lötspitzen 1. Schalten Sie das Gerät ein und stellen Sie eine Temperatur von 250°C ein. 2. Beschicht

Weitere Dokumente für Lötkolben Velleman VTSSC40N

Um das Dokument anzuzeigen Velleman VTSSC40N Handbuch

Velleman VTSSC40N Handbuch (17 Seiten)

Um das Dokument anzuzeigen Velleman VTSSC40N Bedienungsanleitung

Velleman VTSSC40N Bedienungsanleitung (14 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman VTSSC40N Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Lötkolben Velleman VTSSC40N herunter. Vtssc40n GB-NL-FR-ES-D Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Lötkolben Velleman VTSSC40N

Kommentare zu diesen Handbüchern