Velleman PI1000BN Bedienungsanleitung PDF herunterladen

PI1000W 1 VELLEMAN

PI1000W – 12/24VDC TO AC POWER INVERTER 1000W

1. Introduction & Features

Thank you for buying a PI1000W! Please read the manual thoroughly before bringing this device into service.

If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

OVERLOADING THIS DEVICE OR CONNECTING IT WITH AN INDUCTIVE LOAD (e.g. refrigerator, fan,

drill) WILL DAMAGE IT AND AUTOMATICALLY VOID THE WARRANTY!!

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer

will not accept responsibility for any ensuing defects or problems.

• Do not open the housing or modify the device: this creates a risk of electric shock and voids the warranty.

• If there is any problem with the inverter, have it looked at by a qualified technician. Do not try to repair it yourself.

• Unplug the PI1000W when it is not being used.

• Unplug the inverter when starting the vehicle's motor.

• If the PI1000W makes a beeping sound, it means that the voltage of the battery is getting low. Switch off the

device being used on the inverter, unplug it from the battery and replace the battery or start your engine in order

to recharge the battery. The PI1000W will shut down automatically if you do not shut it down. This will leave your

battery with enough energy to start the engine and eliminates the risk of being stranded with a dead battery.

• To avoid battery drainage, it is advisable to let your engine run for 10 to 20 minutes every 2-3 hours of use.

• Respect the polarity when connecting the inverter to the battery. Reversed polarity will damage the inverter fuse.

• Disconnect the PI1000W before recharging the battery. Failure to disconnect the inverter prior to connecting a

charger may result in an input spike, which will damage the inverter. Connecting the inverter's input to a battery

charger may damage the inverter and will void the warranty.

• Make sure the battery voltage never exceeds 15Vdc for the 12V version and 30Vdc for the 24V version. If it does,

the inverter will shut down automatically.

• Make sure there is at least more than 50cm of free space behind the inverter for ventilation purposes. Check

regularly if the fans are still working. If they are not working, shut the inverter down and have it repaired.

3. Description

1. AC output sockets

2. On/off switch

3. Power LED, lights up when the device is switched on.

4. Fault LED: lights up when battery is running low, voltage is too high or the device

is overheating.

5. Chassis earth: to ground the chassis, and therefore the output AC ground. Connect the ground lug to the

grounding point of the location where the inverter is installed. Use a #8 AWG or larger copper wire (preferably

with green/yellow insulation) to connect the chassis ground lug to the location's

grounding point.

Establish the ground connection before connecting the battery.

6. Ventilation fans

7. DC inputs

Make sure the inverter is switched off before connecting it to the battery.

Make sure to connect the '+' terminal of the battery to the + (red) terminal of the inverter and the '-' terminal of the

battery to the - (black) terminal of the inverter. Fasten the connections solidly and use cables of 2m max.

1 2 3 4 5 6 ... 10 11

Inhaltsverzeichnis

Seite 1 - 3. Description

PI1000W 1 VELLEMAN PI1000W – 12/24VDC TO AC POWER INVERTER 1000W 1. Introduction & Features Thank you for buying a PI1000W! Please read the manu

Seite 2 - 7. Technical Specifications

PI1000W 10 VELLEMAN PI1000W – 12/24VDC - AC WECHSELRICHTER 1000W 1. Einführung & Eigenschaften Wir danken Ihnen für den Kauf des PI1000W! Bitte

Seite 3 - 3. Beschrijving

PI1000W 11 VELLEMAN 4. Ausgangssignal: modifizierte Sinuskurve Die Kurvenform des AC-Ausgangs des PI1000W ist eine "modifizierte Sinuskurve&quo

Seite 4 - 7. Technische specificaties

PI1000W 2 VELLEMAN 4. Output Signal: Modified Sine Wave The AC output waveform of the PI1000W is a "modified sine wave" (see figure at the

Seite 5 - 2. Prescriptions de sécurité

PI1000W 3 VELLEMAN PI1000W – 12/24VDC - AC VERMOGENSINVERTER 1000W 1. Inleiding en kenmerken Dank u voor uw aankoop! Lees deze handleiding grondig v

Seite 6 - 7. Spécifications techniques

PI1000W 4 VELLEMAN 4. Uitgangssignaal: gemodificeerde sinusgolf Het AC uitgangssignaal van de PI1000W & M wordt een "quasi-sinusgolf" o

Seite 7 - 3. Descripción

PI1000W 5 VELLEMAN PI1000W – INVERSEUR 12/24VCC - CA 1000W 1. Introduction et caractéristiques Nous vous remercions de votre achat ! Lisez le présen

Seite 8

PI1000W 6 VELLEMAN 4. Signal de sortie: sinusoïde modifiée Le signal de sortie CA du PI1000W s'appelle une "quasi-sinusoïde" ou une &q

Seite 9 - PI1000W 9 VELLEMAN

PI1000W 7 VELLEMAN PI1000W – CONVERTIDOR 12/24VCC A CA 1000W 1. Introducción & Características ¡Gracias por haber comprado el PI1000W! Lea cuida

Seite 10 - 3. Beschreibung

PI1000W 8 VELLEMAN 4. Señal de salida: onda senoidal modificada La señal de salida CA del PI1000W se llama "cuasisenoidal" o una "seno

Seite 11 - 7. Technische Daten

PI1000W 9 VELLEMAN Se pueden modificar las especificaciones y el contenido de este manual sin previo aviso.

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman PI1000BN Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Velleman PI1000BN herunter. Velleman PI1000BN User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für elektrische Velleman PI1000BN