Velleman VDSABS8A Bedienungsanleitung PDF herunterladen (Seite 4)

VDSABS8A

V. 03 – 13/05/2013 4 ©Velleman nv

 Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,

crash, etc. Using the device in an unauthorised way will void the warranty.

4. Installation

 Install the device in a location where few people pass by and that is unreachable for unauthorised persons.

 Make sure there is no flammable material within a 50cm radius of the device.

5. Overview

Refer to the illustrations on page 2 of this manual.

Power button “1” on and “0” off

Power input jack

Low tone level control, 12dB raising attenuation at 100Hz

Hi tone level control, 12dB raising attenuation at 3.5 KHz

Volume control of RCA line input

Volume control of MIC input

Microphone ¼” input jacks, can receive unbalance signals

RCA (R.L) input jack, can receive both balance and unbalance signals

Line output ¼” jack

Input signal overload indicator

6. Operation

Refer to the illustrations on page 2 of this manual.

 Make sure the power switch is set to “OFF”.

 Set the power switch to “ON”. The device starts operating.

 Set the power switch to “OFF” to stop the device.

7. Cleaning and maintenance

 All screws should be tightened and free of corrosion.

 The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,

trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting

supports, do not change the location of the connections.

 The electric power supply cables must not show any damage. Have a qualified technician maintain the

device.

 Disconnect the device from the mains prior to maintenance activities.

 Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

 There are no user-serviceable parts.

 Contact your dealer for spare parts if necessary.

8. Technical Specifications

power supply

115/230Vac 50/60Hz

power consumption

max. 150W

woofer size

8” (20.6cm)

tweeter size

1” (2.5cm)

amplifier

100W (80Wrms)

frequency response

45Hz-18kHz

sensitivity (1w/1m)

96dB

impedance

8 Ohm

dimensions

460 x 310 x 270mm

total weight

9kg

inputs

Line 1 MIC: 6.35mm jack /

Line 2: 2 x RCA

output

6.35mm jack

1 2 3 4 5 6 7 8 9 ... 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman VDSABS8A Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Velleman VDSABS8A