
Programming Procedure
11
K8048 © 2003 Velleman Components
7 Experiments
Use of the experiment push buttons and LEDs:
The K8048 is equipped with a max. of 4 test inputs that can be operated manually with
The device also has 6 diagnostics LEDs that enable the user to simulate outputs.
" to determine for every IC socket which I/O line is linked to
which push button or LED.
he I/O lines coming from a pushbutton have to be configured as inputs in the source
(a 1 in the TRIS-register
for that particular entrance
with a LED must be configured as exits in the sources (a 0 in the TRIS-register for that
Selecting an oscillator with the jumpers
These jumpers allow you to select which IC socket crystal X1 uses.
Place the shunts in locations JP1 & JP2 for use with the 14-pin socket (e.g. PIC16F630).
Place the shunts in locations JP3 & JP4 for use with the 18-pin socket (e.g. PIC16F627).
Place the shunts in locations JP5 & JP6 for use with the 28-pin socket (e.g. PIC16F87x).
No selection can be made for the 8-pin socket since you would lose two I/O's. With this
particular experiment board you can only use the internal oscillator with this socket.
Kommentare zu diesen Handbüchern