Velleman VDPL300QF2 Bedienungsanleitung PDF herunterladen (Seite 6)

VDPL300QF2

V. 03 – 22/06/2012 6 ©Velleman nv

To set the device to work with a DMX controller:

1. On the back panel [5], set DIP switches 9 and 10 to OFF.

2. Use DIP switches 1 – 8 to specify the DMX address:

address DIP switches switch represents

1 1

2 2

3 4

4 8

5 16

6 32

7 64

8 128

DMX channel values

Channel From To Function

0 6 Off

7 66 Group 1 red lights on

67 129 Group 2 red lights on

130 192 Group 3 red lights on

193 255 All red lights on

0 6 Off

7 66 Group 1 green lights on

67 129 Group 2 green lights on

130 192 Group 3 green lights on

193 255 All green lights on

0 6 Off

7 66 Group 1 blue lights on

67 129 Group 2 blue lights on

130 192 Group 3 blue lights on

193 255 All blue lights on

0 6 Off

7 255 All white lights on

0 30 Off

31 255 Built-in program (speed increases according to channel settings)

0 30 Automatic

31 255 Built-in program

0 30 Strobe effect off

31 255 Strobe effect (speed increases according to channel settings)

Notes

• CH1 to CH4 can work together with CH5; the values of CH5 must be set between 0 and 30.

• When using CH 6, the values of CH5 must be set between 31 and 255.

• You can use CH1 to CH6 together with CH7 for strobe effects.

• Channel 7 (strobe) only works if other channels (CH 1 to CH 6) are active.

8. Cleaning and maintenance

• All screws should be tightened and free of corrosion.

• The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,

trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting

supports, do not change the location of the connections…

• Moving mechanic parts must not show any signs of wear and tear.

1 2 3 4 5 6 7 8 9 10 11 ... 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

Velleman VDPL300QF2 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Velleman VDPL300QF2