
VDPLOP1209RGB
V. 04 – 08/01/2013 7 ©Velleman nv
• In case of the 4-channel mode, you will have to set the start address of the first unit to 1 (CH1~4), the
second to 5 (1 + 4) (CH5~8), the third to 9 (5 + 4) (CH9~12), and so on. The highest start address is 509.
• In case of the 5-channel mode, you will have to set the start address of the first unit to 1 (CH1~5), the
second to 6 (1 + 5) (CH6~10), the third to 11 (6 + 5) (CH11~15), and so on. The highest start address
is 508.
• In case of the 9-channel mode, you will have to set the start address of the first unit to 1 (CH1~9), the
second to 10 (1 + 9) (CH10~18), the third to 19 (10 + 9) (CH19~27), and so on. The highest start address
is 504.
To set the device to work with a DMX controller:
1. Press <MENU> until <PERS> is displayed and press <ENTER>.
2. Use <UP> and <DOWN> to select the 3, 4, 5 or 9 channel DMX mode and press <ENTER>.
3. Press <MENU> until <Addr> is displayed and press <ENTER>.
4. Use <UP> and <DOWN> to set the DMX starting address (d--1 ~ d512) and press <ENTER>.
DMX Channel Values
3-channel mode
Channel From To Description
1 0 255 Red 0 ~ 100 %
2 0 255 Green 0 ~ 100 %
3 0 255 Blue 0 ~ 100 %
4-channel mode
Channel From To Description
1 0 255 Dimmer 0 ~ 100 %
2 0 255 Red 0 ~ 100 %
3 0 255 Green 0 ~ 100 %
4 0 255 Blue 0 ~ 100 %
5-channel mode
Channel From To Description
1 0 255 Dimmer 0 ~ 100 %
2 0 255 Red 0 ~ 100 %
3 0 255 Green 0 ~ 100 %
4 0 255 Blue 0 ~ 100 %
9 channel mode:
Channel From To Description
1 0 255 Dimmer 0 ~ 100 %
2 0 255 Red 0 ~ 100 %
3 0 255 Green 0 ~ 100 %
4 0 255 Blue 0 ~ 100 %
5
0 10 No function
11 200 Colour macros
201 205 White 1: 3200 K
206 210 White 2: 3400 K
211 215 White 3: 4200 K
216 220 White 4: 4900 K
221 225 White 5: 5600 K
226 230 White 6: 5900 K
231 235 White 7: 6500 K
236 240 White 8: 7200 K
241 245 White 9: 8000 K
246 250 White 10: 8500 K
251 255 White 11: 10000 K
Kommentare zu diesen Handbüchern